SOLIDIGM D3-S4520 1.92TB 2,5inch SATA 6GB/s 3D4 TLC Generic Single Pack
Du måste logga in för att kunna handla/se priser.
|
|
SOLIDIGM D3-S4520 1.92TB 2,5inch SATA 6GB/s 3D4 TLC Generic Single Pack
Artikelnr.:
SSDSC2KB019TZ1Z
-
Läshastighet
550MB/s
-
Skrivhastighet
510MB/s
-
Gränssnitt
Serial ATA III
-
Formfaktor
2.5"
-
Kapacitet
1.92TB
|
D3-S4520 Series (1.92TB, 2.5in SATA 6Gb/s x4, 3D4, TLC) Generic
SSDSC2KB019TZ1Z
Standard-endurance SATA drives with capacities up to 7.68TB, designed to increase server efficiency and boost IOPS/TB performance over legacy hard disk drives (HDDs) for cloud storage.
Specifications:
General
- Capacity 1.92 TB
- Form Factor 2.5" 7mm
- Interface SATA 3.0 6Gb/s
- Weight 60.9 gms
- Lithography Type 144L TLC 3D NAND
- Use Conditions Server/Enterprise
Performance
- Sequential Bandwidth - 100% Read (up to) 550 MB/s
- Sequential Bandwidth - 100% Write (up to) 510 MB/s
- Random Read (100% Span) 91000 IOPS
- Random Write (100% Span) 38000 IOPS
- Power - Active 3.1W
- Power - Idle 1.1W
- Latency - Random Read (typ.) 104µs
- Latency - Random Write (typ.) 54µs
- Latency - Sequential Read (typ.) 37µs
- Latency - Sequential Write (typ.) 38µs
Reliability
- Warranty Period 5 yrs
- Endurance Rating (Lifetime Writes) Up to 2.5 DWPD / Up to 8.8 PBW
- Mean Time Between Failures (MTBF) 2 million hours
- Uncorrectable Bit Error Rate (UBER) < 1 sector per 10^17 bits read
- Vibration - Operating 2.17 GRMS (5 - 700 Hz) Max
- Vibration - Non-Operating 3.13 GRMS (5 - 800 Hz) Max
- Shock (Operating and Non-Operating) 1,000 G (Max) at 0.5 msec
- Operating Temperature Range 0°C to 70°C
Då vi sammankopplar vårt lager med flera externa leverantörer kan det ibland uppstå en viss prisskillnad vid beställningar som innehåller flera antal av samma artikel. I dessa undantagsfall kommer ni att kontaktas av er säljare för information och alternativ.