APC Sw Rack PDU 2G 0U (7)C13 / (1)C19
Du måste logga in för att kunna handla/se priser.
Rack PDU 2G, Switched, ZeroU, 20A/208V, 16A/230V, (7) C13 & (1) C19
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
- Nominal Output Voltage 200V,208V,230V
- Maximum Total Current Draw per Phase 20A
- Output Connections (7) IEC 320 C13
- (1) IEC 320 C19
- Overload Protection No
- Nominal Input Voltage 200V,208V,230V
- Input Frequency 50/60 Hz
- Regulatory Derated Input Current (North America) 16A
- Input Connections IEC-320 C20
- Acceptable Input Voltage 100-240 VAC
- Maximum Line Current per phase 20A
- Maximum Input Current per phase 20A
- Net Weight 3.23 KG
- Maximum Height 988.00 mm
- Maximum Width 56.00 mm
- Maximum Depth 46.00 mm
- Shipping Weight 4.77 KG
- Shipping Height 1125.00 mm
- Shipping Width 165.00 mm
- Shipping Depth 114.00 mm
- Color Black
- Operating Environment -5 - 45 °C
- Operating Relative Humidity 5 - 95%
- Operating Elevation 0-3000 meters
- Storage Temperature -25 - 65 °C
- Storage Relative Humidity 5 - 95%
- Storage Elevation 0-15000 meters
- Regulatory Approvals cUL Listed,EN 55022 Class A,EN 55024,EN 61000-3-2,EN 61000-3-3,FCC Part 15 Class A,ICES-003,PSE,UL Listed,VCCI Class A,VDE
- Standard Warranty 2 years repair or replace
- Environmental Compliance RoHS,REACH: Contains No SVHCs,Contains Lithium Battery
Features & Benefits
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.
Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
An IT-ready, scalable monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.
Då vi sammankopplar vårt lager med flera externa leverantörer kan det ibland uppstå en viss prisskillnad vid beställningar som innehåller flera antal av samma artikel. I dessa undantagsfall kommer ni att kontaktas av er säljare för information och alternativ.